Fale Pasifika

Project:Fale Pasifika, Auckland University Architect: JASMAX		1.In order to understand the interaction of members – especially where radiused raking round members meet horizontal round members on vertically positioned curved frames – the 3D model became an absolute necessity.

2.The main 200mm diam curved Glulam frames – each member 14m long were hand planned in the factory to achieve the rounded finish.	3.With the individual items sorted out pre-assembly became the next challenge. With a requirement for concealed joints a lot of accurate slotting and pre-drilling was necessary. Having facilities to lay out the fames in full size on the factory floor was a great advantage. Working on exact plan dimensions, checking out site set-outs each frame was fully assembled. Working to exact dimensions with the irregular form of natural round poles was a challenge in itself.	4.Specifically designed metalwork connections were manufactured and individually slotted, fitted, drilled and labelled.
	5.The versatility of Glulam once again enabled the most cost-effective solution to a complex structure. Traditional forms which are no longer possible using traditional materials can be effectively replicated using manufactured Glulam.